Showing posts with label Submersible. Show all posts

Monday, February 6, 2012

Little Giant 566409 WGP-65-PW Premium Submersible Pond Pump, 1900 Gallons Per Hour

!: Buy Little Giant 566409 WGP-65-PW Premium Submersible Pond Pump, 1900 Gallons Per Hour compare

Brand : Little Giant
Rate :

Price : $112.49
Post Date : Feb 06, 2012 20:34:38
Usually ships in 24 hours

Ideal for use in waterfall and stream applications, this powerful direct drive pump features a unique dual discharge design for operation of two water features simultaneously. This pump is extremely versatile, able to be used vertically or horizontally. Unique dual discharge design allows for operation of two water features simultaneously. Powerful direct drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps. Corrosion resistant body designed for non-potable submersible use. Includes two 1-1/4" MNPT x 1" barbed elbow adaptor and a 1-1/4" MNPT discharge cap.

Steele Products Sp-gl350 3,500 Watt 4-cycle Propane Powered Portable Gene... Quickly

Tuesday, January 24, 2012

Submersible Fountain Pump w/ 50ft Cord

!: Buying Submersible Fountain Pump w/ 50ft Cord save you money!

Brand : Al's Garden Art | Rate :

| Price : $59.99
Post Date : Jan 24, 2012 14:47:26 | Usually ships in 1-2 business days

Submersible Fountain Pump w/ 50ft Cord

Connects to 1/2 and 3/4 inch ID tubing Adjustable, Mag-drive, 120v (60Hz-54W-1.2A)

More Specification..!!

Great Deals Arbor Hollow Body Guitars Ge Dual Fuel Range Ideas Promotional Buy Old Gringo Boots

Thursday, January 12, 2012

Sunforce 82328 80W Solar Submersible Water Pump Kit

Sunforce 82328 80W Solar Submersible Water Pump Kit Review

Sunforce 82328 80W Solar Submersible Water Pump Kit Feature

High strength plastic construction with stainless steel fasteners
Permanent magnet motor and carbon brush life of over 3000 hours
Works on average 8 hours a day
Includes 98.4 feet power cord and 98.4 feet water tube
Moves up to 26.4 gallons of water per day

Sunforce 82328 80W Solar Submersible Water Pump Kit Overview

The Sunforce 80 Watt Solar Submersible Water Pump is powered by an 80 Watt, 24 volt solar panel and operates in sunny or cloudy conditions, providing an 8-hour continuous duty cycle on average. It can be used for flood control, sump pump applications, drainage, industrial applications and more. Featuring a permanent magnet motor and carbon brush life of over 3000 hours, this solar pump is made of high strength plastic construction with stainless steel fasteners. It includes 98.4 feet power cord and 98.4 feet water tube and can move up to 26.4 gallons of water per day.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Jan 12, 2012 09:38:06

Help Mica Floor Lamp Learn How Dyson Factory Direct Good Bargain How To Install A Drip Irrigation System

Wednesday, December 7, 2011

Sunforce 82328 80W Solar Submersible Water Pump Kit

!: Comparison Sunforce 82328 80W Solar Submersible Water Pump Kit quick

Brand : Sunforce
Rate :

Price : $527.60
Post Date : Dec 08, 2011 05:27:43
Usually ships in 24 hours

Old Gringo Purses Discount Cavs Karaoke Players Ideas Bj Penn Rvca Shorts Compare

Thursday, November 17, 2011

Submersible Fountain Pump w/ 50ft Cord

!: Coupon Submersible Fountain Pump w/ 50ft Cord compare

Brand : Al's Garden Art
Rate :

Price : $59.99
Post Date : Nov 17, 2011 17:31:16
Usually ships in 1-2 business days

Connects to 1/2 and 3/4 inch ID tubing Adjustable, Mag-drive, 120v (60Hz-54W-1.2A)

Basement Column Covers Discounted Shop For Bright Beginnings Formula

Monday, October 31, 2011

Little Giant 566409 WGP-65-PW Premium Submersible Pond Pump, 1900 Gallons Per Hour

!: Used Little Giant 566409 WGP-65-PW Premium Submersible Pond Pump, 1900 Gallons Per Hour cheap

Brand : Little Giant | Rate :

| Price : $112.58
Post Date : Nov 01, 2011 01:06:09 | Usually ships in 24 hours

1900 GPH @ 1 Feet head
Voltage: 115
1/8 horsepower
Unique dual-discharge design allows for operation of two water features simultaneously
Includes two 1-1/4-Inch MNPT x 1-Inch barbed elbow adaptor and a 1-1/4-Inch MNPT discharge cap

Guitar Junior Answer Used Toro Lawn Blowers

Wednesday, October 26, 2011

Solar Powered Submersible DC Water Pump

!: Solar Powered Submersible DC Water Pump

This solar water pump powered by 100W solar panel which charging a 12V battery. Flow rate 600L/min at 20m deep. It is easy to install and low maintenance. It is suitable for remote location without electricity. It pumps water from river, pond or well for drinking and farming. Other solar DC pump models we have can pump water from 160m and flow rate up to 20 cubic meter per hour.

Solar Powered Submersible DC Water Pump

50 Mw Laser Pen Solve First Act Drum Set Honeywell Gun Safes Life Tips

Wednesday, October 19, 2011

Submersible Well Pump How to Replace

!: Submersible Well Pump How to Replace

Replacing a submersible well pump is not a complicated task and relatively simple if you understand the basics about a well system - like the placement of the pump, how the submersible pump operates and how it is installed in a well casing. An advanced do it yourselfer with knowledge of electrical wiring and some basic plumbing skills is probably capable of replacing a submersible irrigation pump. This is not a step by step installation guide but rather an overview for a general understanding to evaluate whether to do it yourself or hire a contractor. The savings on the cost of labor, if you do it yourself, will be about 50 - 60% of the total price of a contractor doing the job. The first factor in deciding whether to attempt doing it yourself is how deep the well is and do you have a large enough lay down area to layout the pipe in your yard once you start pulling it out of the casing. If your well is 50' to 150' deep, I would recommend doing it yourself if you are physically capable to continuously lift and pull about 40 to 70 pounds of weight and hold it in place for during the complete removal of pump to keep from dropping it back into the well. To do this you will need at least one other person to help you pull out the pump and guide the discharge pipe away from the well as you are lifting it out.

The well casing in made of steel, iron or PVC pipe usually 3"or 4" inside diameter and this acts as a sleeve in which the pump housing, discharge pipe and wiring go down to reach the water level within this pipe casing. Attached to the submersible pump is the discharge pipe, usually 1" to 1- ¼" flexible poly pipe and the electrical wiring which also runs into this casing to the depth of submersible pump in the well. The deeper the well, the heavier and more difficult it is to lift out. The weight of the pump assembly may require some rigging above the well casing to help lift and hold the pump assembly in place so it doesn't slip and drop back down into the well casing as you are pulling it out. Once you start pulling up of the pump you must continue the motion until it is fully out of the casing. If you are doing this manually attach a rope beforehand to the top end of well cap so the other person can easier hold on to it and tie it off to something - a tree or fence, in between lifts if you need to take a break and stop lifting.

If you decide to replace the well pump yourself, here are some tips to remember. Determine that the pump motor is bad by checking circuit breakers, switches and check that power is at the well head. If power is on at well head it is a good sign that the pump is broke. Turn off the power at the breaker panel, tag and lock it out for safety before you start exposing the well head. Clear the area around the well head, approx 6' to 8' diameter, of shrubs and plants so you have enough room to expose the pump outlet and electrical connections. Disconnect the discharge pipe and undo the wiring at the junction box near the top of the well. Loosen the bolts on top of the casing cover, this is a squeeze type of cover with a thick rubber ring that expands as tightened and contracts as loosened against the casing interior. Once loose, try to lift the cover, as you lift you will be getting an idea of how heavy the whole assembly is of which you have to lift out of the well.

Now you are ready to lift the pump. Rubber gloves, protective clothing or coveralls should be worn as the pump piping may have an iron and silt residue on the exterior and can be quite a messy job. Fasten a pull rope around the top of the well head for the other person to hold on and tie off if needed. Some wells may have a leader rope or cable already attached from original installation instead of relying on the discharge hose clamps and connection. The person who will do the actual pulling should stand directly above the well to lift the discharge piping straight out of the casing and the other person should stay with the top end of well cap and guide it to where you lay it down as you pull. Make sure that the person guiding the end has a good grip on the end before you release to get another grip. Continue until pump assembly is fully out of the casing and wash off the entire pump end so you read the specification tag of the pump.

Collect the information from the old pump - brand, model, HP, voltage, phase, 110/220, rpm, 2 or 3 wire configuration, continuous duty and the pumps outlet size and discharge pipe size. Most residential submersible pumps are either 2 wire or 3 wire configuration. The 2 wire type has 2 - 110v wires along with a case ground to pump housing. The 2 wire pump needs no controls. If it is a 3 wire pump you should replace the controls also.

Most submersible pump are two piece units bolted together to be one assembly and consists of the motor and the pump. You can just replace the motor or pump if you choose, but I would highly suggest that you replace the whole assembly. After you have identified what type and size pump you have you may want to decide to upgrade your system with a higher volume pump of keep the same configuration. For upgrading, you should contact a supplier or well contractor for recommendations to be compatible with your needs and piping sizes to which your pump feeds.

Installing the new pump assembly. Make an itemized list of new parts, controls, fittings or wiring as needed. If the existing wiring and flex pipe are in good condition there is no need to replace them. To install the new pump you will have to splice the electric wires together in a waterproof connection. Consult an electrician or well contractor to specify the power wire splice connector type and technique acceptable for well applications. Connect the pipe fittings and pipe clamps as directed in the manufacturer's instructions. Tape the power wires about every 2' for the entire length to the flex pipe for ease in reinstallation of pump into casing. Turn the power to the pump on momentarily to check if it is working before inserting assembly into well. Turn the power breaker off and prepare to insert the pump back into the well again using 2 people - one at the well opening lowering and feeding the pump down and the other person at the well head cover feeding the slack to you and to help hold back to prevent the pump from dropping quickly down the casing.

Submersible Well Pump How to Replace

Help Corner Bakers Rack With Wine Rack

Sunday, March 27, 2011

What is the Difference Between an External Pond Pump and a Submersible Pond Pump?

!: What is the Difference Between an External Pond Pump and a Submersible Pond Pump?

A person just getting into ponds may be confused at the terminology and types of pond pumps, particularly when trying to determine the type of pump they need for their pond. The most common questions is "What is the difference between an external pond pump and a submersible pond pump?"

The easiest and most simplified answer is to say that one is used outside of the pond (external) and the other is used inside of the pond (submersible). However this really does not fully answer the question.

It is true that an external pond pump is placed on dry ground outside of the pond, but there are other things to note about an external pump. External pond pumps. are going to be best for larger ponds due to the fact that they are more energy efficient and are capable of moving larger volumes of water. Usually ponds over a couple of thousands of gallons will benefit more from an external pump or ponds with larger water features may also need a larger external pump due to the distance that the water is going to travel to supply water to the water feature as in the Case of a large waterfall. It is also important to note that some external pumps may also need to be hardwired and are not simply "plug and play" like the submersible units.

Speaking of submersible pond pumps Submersible pumps are going to be best used in small ponds or when powering smaller water features or equipment like a small filter. Submersible pond pumps are very easy to install. Basically they are placed in a desired location in the pond and plugged in and that is it. Furthermore, many submersible pumps come with fountain and spray attachments so that they can easily be utilized as a small fountain feature.

Remember to effectively choose the correct pond pump for your pond, pay attention to the gallons per hour (gph) that the pump move and select the pump that will move the entire volume of water at least once in an hour. So a 5000 gallon pond will most likely need an external pond pump with a rated GPH of at least 5000.